Bargain Hunting on Ebay again

I was taking a break and perusing Ebay again looking for some bargain deals for me and the  little guy to add to our wishlist… and ran across these goodies, so thought I would share them for  anyone interested.  A lot of these are from overseas sellers, so expect a wait  to get your goodies.  There were  so may great finds added to our wish list, but here are just a few of them.

Embossing Folders by  seller 15oceaneshop

There are a lot of fun new designs to choose from and I didn’t see anything priced over $2 in this batch.  Great way to pick up a bunch of designs if you are new to embossing, or if you just want to bump up your design stash.

I particularly like this one… no surprise there really since  I love the Steampunk and vintage stuff so much.  Some of you may remember my adventures in Playdoh a while back… I love embossing folders like this… they make great image presses for Playdoh or Polymer Clay projects too.  I am very into  multifunctional crafts lol… I like to get my moneys worth out of things we buy… so if I can find more than just the traditional purpose for them.. all the better  🙂

Clock embossing folder

Talking of Multifunctional… I love Silicon molds,  these are  great for  icing and confectionary of course, as most are intended.  BUT … they are also great for Plaster of Paris, Polymer Clay and Embedding Resin projects.  Someone asked me once if they could be used for Paper clay projects.. I still don’t have an answer to that one.. but I am probably gonna try it one day  LOL.

I found a bunch of cool molds that would be  fun to play with…. these particular ones were listed by homesale_sky and  this is just a handful of the really cool molds that caught my eye.  These would be great for decorating mix media, upcycled projects or jewelry making.

I also found some really cool metal dies which are definitely going on  my wish list…

3D bridge

Bubbles/ circles
Our Ebay wish list is growing …. lol.

I will be compensated for purchases made through affiliate links on this page

Cricut March Madness Box . 3 11/15 and …stuff

Are you ready for Box 3? The new box is SUPPLIES…. and we all need those right?

The contents of this box are  going to cost $34.99 and are valued  at $89.91 …. Ok so ..what is in the box.. by all accounts from what I can see.. so guarantees….BUT.. 2 rolls of window cling, 3 rolls of glitter vinyl, a roll of adhesive foil, 3 pearlescent paper sample packs in neutral, pastels and bold colors. All things I don’t have and really would like to play with… hurry up pay day. Quantities are limited so grab it while you can.


Cricut March Mystery Box #3 – Supplies

Free shipping at Cricut with code MYSTERYMARCH

Get $14.99 Flat Rate Shipping to Canada on all orders $50+

10% off + free standard shipping with code LOVECRICUT (EXCLUDES AIR 2 and CRICUT ACCESS)


Have you seen the Cricut Mint Machine Bundle…?  check out that price and all the goodies that come with it.  I am so coveting the new Explore 2… I would love one of these.   If you are totally new to Cricut, which is rare nowadays… but always a possibility..   There are so many cool things you can do with these machines…way beyond what Cricut even show you. Card making, scrapbooking, home decor, kids crafts, personalized clothing, gifts, packaging…… just  the tip of the iceberg.



We had one member on the message board who made all of the signs  for his re-enactment group.

Me.. I bought mine to make custom photo mats then got hooked ..and there is still a tonne of things I haven’t even tried yet.

One of my favorite  things about my Cricut is the aftermarket Adapters I bought,  which sadly are not available for the ONE.. but they are available for the Explore, Explore Air and Air 2 and those are  FANTASTIC. these are pen adapters for the Circut by a company called Chomas Creations and they allow you to expand the range of pens you can use in your Cricut.  For people like me..that is HUGE…it has opened up a whole new world of potential projects that I wouldn’t normally attempt because my handwriting is terrible and my calligraphy skills.. non existent lol.  But not just that..  that means I can draw with so many more pens than before…




One of my favorites and one of the most popular pins on my pinterest page is this.. the powder embossing done on the Explore. Yup.. POWDER EMBOSSING drawn on the Cricut.









This allows me to take  designs and instead of cutting them, I can draw them and emboss them.. LOVE LOVE LOVE this.  There are other embossing pens, including one I made myself.. but these Zig Embossing pens coupled with the Chomas Adapter.. SWEET !!!




















Anyone who is a regular on here knows how much I love my Zip pens.. and  most all of them will work in my Cricut with the adapter… with the exception of the  big chalk pens. But that is ok…. because I can outline on the Cricut then trace over it with my bigger pens when I want to do chalk signs.  Way better than anything I could ever achieve by hand.





And of course.. the ..  how could I not share what is probably my favorite paper to use on the Cricut.. this stuff is AWESOME.



It cuts beautifully, looks and feels amazing and gives a little extra something something to projects.



These projects were done with Black Velvet paper, but it comes in a bunch of other colors.. including white, which I love to print and color digital stamps on.


















Did I mention stencils…  check out this etched glass beer stein I made a couple of years ago using a stencil I made and cut on the Cricut. This was for one of our message board challenges. I  Just cut my stencil from vinyl, slapped it on..slapped on etching cream and voila.. a fun beer mug  🙂

 









…so by now, if you are new to the Cricut….you are probably beginning to realize the Cricut can do a lot more than just use images on cartridges and on Design Space Access…. Yup you can upload your own designs or designs purchased elsewhere. Card templates, toppers, digital stamps.  I’ve  got a confession… I don’t subscribe to Access, I own probably 10 cartridges.. and I use my Cricut to make a lot of cool projects.   So if the price of Access, or the designs not being to your taste is something that was holding you back ..  never fear… this machine still has a lot to offer.

Print and Cut is fantastic, and when the DS3 ( Design Space update) comes out soon… it’s going to be even better.  I for one.. can’t wait.  DS3 has so many cool new features… admittedly there are still some things I would love to have added on…  because I am used to having them in my graphics programs.. but it’s not a big deal to do it externally and then upload them.

Check out some of these fun projects done using Cricut Print and cut…

KennyK Stamps key holder

3D layered Cute As A Button Slate Wall Plaque

 

 

I will be compensated for purchases made through afiliate links on this page

CraftsUPrint Treasure Chest Bonus packs project, Vault and Friday Freebie

Some of you may have seen me post previously about the Treasure Chest items I got free with one of my  cut file orders. CraftsUPrint are actually mailing these FREE when you order over £15 ( currently on offer at £10 ) worth of files or card kits.  I have to be honest I wasn’t expecting them to be that great quality, cmon..it’s free right  lol.  But when they arrived I was pleasantly surprised by the quality of the  sheets..AND the size.  I wasn’t expecting full A4 sheets either.. 15 of them.. and you get to choose the designs you want.

If you missed  my previous post, you can find details below

My Treasure Chest Freebies arrived…. impressed !




Well last night I finally had a moment to sit and play with them… and I made my son some fridge magnets for his word wall.. which incidentally is one side of my upright freezer lol. It’s situated near the dining room table so always in view of him when he is eating or playing.. mommy’s subtle way of keeping him learning no matter what he is doing.










He spends a lot of time playing with Playdoh or coloring etc at the table.. and of course it’s a great way for him to “earn ” snacks during the day.  If you missed previous posts about the Cohas Magnetic sheets (formerly known as ZiggyBoard) I use to make his  wall.. I added some of them to some cheap wood cut circles and some of them I just added the Magnetic strip straight to the back of them.
Now the link is to the commercial product, what I am actually using is what are referred to as “tails” and “seconds” so anyone who is interested in buying some of these for projects, let me know. These are perfect for making magnets, and letter walls and using as small magnetic chalkboards. I have allsorts of projects on the blog using this stuff and I love it (search magnet, or Ziggy on the blog). It cuts like a dream on my Cricut Explore, by hand, my paper cutter, My Sizzix Big Shot… so very versatile and lots of fun to be had. I also used it to hang my metal dies for easy grabbing.. LOVE this stuff.



Well CraftsUPrint also just added a new video about the treasure chest, so I figured I would add that in for anyone interested.  If you have kids who like to craft, or you want some fun card or project toppers.. check them out.  I grab a set every time I buy new cutfiles.. in fact, I’m off to get more when I finish up this post as I see some fun new cut files I need to grab.  These are great for  projects with my 4 year old too as the Treasure Chest also includes sticker sheets.

They have added in lots of new items too, check out the contents of the current Treasure Chest right now not only can you get access to the treasure chest with a £10 order, you also get access to the vault for 24 hours.. and that is filled with freebies too. Lots of great card kits.. and they are all yours.. you have 24 hours to grab them for free.

Right now.. these are part of the vault collection.. which includes card kits, toppers and digital papers

Treasure Chest Instructions


and then of course, we can’t forget the Friday Freebie



3D Wedding and Romance Double Tri Shutter Card
Kit by Carol Clarke


and lastly.. but definitely not least.. you of course get your free game AND a chance to win the Crafty Bob Pot. I have been lucky enough to win this twice now.. the last time was over $80 worth .. I had a blast choosing cut files with that win !.



I will be compensated for purchases made through affiliate links on this page

Cricut 12 Days of Christmas Flash Sale extended! coupons & project ideas

If you still haven’t picked your Cricut Explore up..  you still have time.  Cricut extended their flash sale and you can pick up an Explore Machine, or Bundle and still get it before Christmas if you order by the 16th.

crciutsaleextended

Deals on the Explore start at $139, there is a deal for every budget…  Shop now and  have yourself a Very Merry Cutmas!  Deals and Coupons  below
cricut_machines
Explore’s aren’t just for the ladies… we’ve had guys on our Message Board too…  Guys who do reenactment and  want to build signs and  props for their events.  Model builders who want to customize their projects with their own vinyl decals, stencils or printable decorations. Woodworkers and  toy makers who  need unique designs to personalize items. so many uses for this machine as well as the  card making and scrapbooking people  usually think of.

Fabulous tool for  Crafty Homeschoolers  and teachers too.  So many Fab designs and things you can use in your daily lessons..personalized reward stickers, labels,  decor,  and so many neat ways to  brighten up Essays, reward charts, certificates, calendars, work books ….and more.

Have a chef in the house? Create fun personalized aprons and storage containers with Vinyl products.

Cricut Design Space has 1000’s of images and fonts available for those of you who prefer digital access over cartridges. **Not All Cartridges are available in Design Space… and Cricut Access

Need something more Unique… they have you covered there too.  Import your own files for Print and cut to add your hand colored digital stamps to your projects, turn them into easy 3D Decoupage designs, make your own stencils and upload your own templates to create stunning card designs, boxes and envelopes using files purchased by fab designers on CraftsUPrint, Dreaming Tree and similar Cut File stores.

Create  one of a kind Scrapbook covers and pages, or framed artwork like this:

cup_kk_steampunk_page_wmded2
Don’t have a Large Format Printer to  print out super Sized digital Stamps for your project ? Cricut has you covered.  This little lady is printed on a sheet of  11×17 Neenah card stock.
kk_toontimeWant to make  intricate cut  layered cards? vellum flowers?  gift boxes….  here’s a quick peek at some of the past projects you can find on the blog.  Everything from Chalk board vinyl and chalk pens, boxes, intricate cuts, 3D layered images, fabric painting, powder embossing…

 

Make your own magnets with printable vinyl and Magnetic sheet ( also available as pre-cut shapes, perfect  for  gluing your cut projects to).

Draw and Write on Fabric with fabric pens, Create designs for Powder Embossing on the Cricut, love  the Chalk Marker look? .. sorted.  The Adapter I use lets me do it ALL.

Aftermarket Pen and marker Adapter from Chomas Creations  allows you to utilize a wide range of pens for embossing, drawing, fabric design etc.  These Adapters are not available for the Cricut ONE as it utilizes a single cut/writing head feature.  The engraving adapter is available for all Cricut Explore Machines.  My marker Adapter is a permanent fixture in my Explore  🙂
The possibilities are endless.. so grab your Cricut Explore and supplies and get ready to start off  2017 in style…

Cricut December Mystery Box –   rumor has it this has a  lot of really cool foil in it and some Cartridges…

30% off most supplies at Cricut  Stock up  now, once you get started you won’t want to stop.  Great deals in Supplies, bulk buys and clearance.

Extra 10% off everything (excluding Cricut Access and Explore 2) + free standard shipping with code 12DAYS

Home & Family have a promotion  on Facebook right now, including  promo code Hallmark16 for 20% off .  No  details on any exclusions, so you will just have to give it a try.. but it probably excludes Air 2 and Cricut Access?

I will be compensated for purchases made through affiliate links on this page

 

CraftsUPrint Friday Freebie

cup742150_16808

 

 

Today the Friday Freebie over at CraftsUPrint is this adorable 3D snowman kit by Elizas Emporium.  You can see more Elizas Emporium  kits here

CraftsUPrint have  extended their “Big One” deals too..

 

 

 

 

 

I will be compensated for purchases made through affiliate links on this page

CraftsUPrint Friday Freebie – 3D Pop Up Box Decoupage Card

cup727923_2049

 

Before I run off to bed…. here’s the new Friday Freebie.. how cute is this.

SNOWMEN GALORE! 3D Pop Up Box Decoupage Card & Matching Envelope Kit by Janic Shehan, Tah-Dah Studio

 

 

 

 

I will be compensated for purchases made through affiliate links on this page

Layers, layers and more layers … & that was just the background!

If you ever have an idle moment and have never tried this.. you should give this a shot lol. This will keep you out of mischief….and so will reading this epic length War ‘N’ Peace blog post haha.

7 layers for the frame, tag on another one if you include the fancy corner.. 2 layers for the butterfly and another 6 layers for the  bouquet…. THAT’S A LOTTA LAYERS lol.

But when it really comes down to it.. the worst part is getting everything on straight, oh and deciding which flowers come  to the front and need the most layers lol.   I have to say of all the 3D projects I have done, this image was probably the easier  when it came to  figuring out how to cut the layers.

7 Print and cut sheets on my Cricut later…  and I have the start of my card.  I colored one completely, I like to do that as a reference when I come to build the actual project… plus it gives me a colored piece to use on another project later ..score!

So I colored one… then started  working out my layers while the Cricut was cutting two silhouettes out for sandwiching between the bottom two layers.  Normally I pop my 3D projects with Darice adhesive foam sheet, but I wanted this one to be a bit more subtle…so I sandwiched a few black sheets in for a little additional depth. The final layer of a single flower is missing off this photo.. DOH

pp_3d_layers_wmd

Once I had all my  Cricut cuts done, I started to hand cut away the pieces I didn’t need on each layer.  When I am doing a one off project, I just fussy cut by hand after cutting the main image.  If I am doing multiples I make cut files for my Cricut.  So I fussy cut  my top 5 layers  and then started to color each layer, starting with  the  top.  when I use Darice foam I tend  to to color around the edges of  the  layer below a bit so it won’t show  when assembled..but with subtle layers like these I just  ink up the white edges with a marker.

Once I had it all trimmed up and colored.. next came the hard part… what to mount it on. Now I  like to take a photo, or scan and import it into my graphics program at this point..for several reasons.  A: I like to be able to grab a cuppa and sit back and just look at it and see where I missed blending, coloring etc… for some reason I have a more critical eye  when viewing it that way. B: I like to play around with layout ideas and rather than waste time cutting and trying ideas and potentially wasting a lot of  card…  the girls on the message board will tell you.. me and pattern paper .. not a good mix lol.  I envy you ladies who can pick and mix and match patterns and colors with ease.  I am not sure if it’s my limited choice of papers, or just that it’s not  ever been my taste..but  good lord it’s like pulling teeth lol.

pp_3d_bwcomp

I started off simply by  putting my original coloring on a white  piece of card and the 3D layers on a black piece… but liked them both for different reasons.. so that was no help lol. So my next move was layers and frames/borders.  I just kept tweaking and adding borders to my image in a graphics program till I started to get a look I liked.

This was my digital rendering

pp_3d_framed_ty_wmd

Once I had a basic idea of how I wanted the frame to look…. that is when I grabbed my cutter and some black and white card and started cutting all those layers.  When I got them all cut, I  took a sheet of 11×17 white card and scored it to make my card base and started layering on the cuts to build the frame (unglued at this stage).  Then it happened…. for some reason it just felt flat, so there I was digging around in my paper cabinet looking for my Black and white collection.  Funnily enough the polka dot paper is the first one I tried … 4 patterns later.. yup I was back to Polka Dots lol.  It just seems classy to me, I did a curtain fold card last  year  in the polka dots and it looked great… so dots it was!

I attached that to the card base with a half inch overlap  at the top, which gives a nice neat look to the top and back of the card. and then came that  time … yes THAT time…  the one where  I always end up gluing all my frames down  skewy.  I blame it on my computer glasses, they aren’t designed for crafting haha.  Just as well for the most part I like to  have my frames tilted on projects lol.  But for this one I needed straight and centered and all that fun stuff…. It’s not perfect, but I think it came out pretty good.  I used my paper cutter to help keep me aligned…yay for paper cutters!!

Ok so all the base layers were on, the flowers layers were all cut, colored and assembled… so on they went.  I had an idea to add the butterfly, but wanted to do a ghost layer. So I actually cut two at once so that the black layer wouldn’t cut all the way through, it is more like a solid embossed layer.  Sometimes if I want to be funky, I do this  double layer cut so the  cutouts from one meld into other layer for a two tone embossed look… it’s kinda cool. Unpredictable at times so a touch of glue is necessary haha… but still looks cool and worth the extra effort.  I’ll maybe show that another time if anyone is interested.

So there was my butterfly…but where to pop it…. top right or bottom left????   I couldn’t decide so asked hubby…. his response… and I had to laugh.  “Top right, I always see Butterflies at the top of flowers… not at the bottom”  He is such a practical wee soul at times, no artistic license or sense from that direction lol.  So  on it went..where butterflies apparently should be lol.

pp_3dframed_watermarkedI didn’t have a particular recipient or occasion in mind, so I am  leaving that blank for now… hence the big space on the left.

So I thought I was done..YAY me.  But  the more I looked at it as I took the photos for this post… I couldn’t help but feel something was missing, it just didn’t seem quite balanced.

Enter Sammy and her fabulous Corner dies to the rescue.  I just happened to have that one single corner cut in my  cuts organizer… BINGO… now I am done!

pp_3d_famed_corner_wmd

Hope you like it 🙂

Base card: Neenah 11×17 110lb Index card
Polka Dot Paper: Recollections Black & White Paper pad
Black and white frame layers: Recollections 65lb solid color packs
Fancy Corner:  My Little Paper World Corner Die  –  8 die set  (Group buy for US option available)
Image: COUNTRYSIDE BOUQUET DIGITAL STAMP SET by Power Poppy
Butterfly:  Gina Marie Designs Butterfly & Beautiful Die set
Colored with: Chameleon Pens
Glue:  Tombow Aqua & Zig Photo Tape
Cutting tools:  Cricut Explore, Sizzix Big Shot ….and scissors

I will be compensated for purchases made through affiliate links on this page

Challenges:

corrosivechallengesbyjanet.blogspot

lilpatchofcraftyfriends.blogspot

abitmoretimetocraft

creativecraftcottage

artimpressionsstamps 193-cards-to-die-for

livelaughstamp.blogspot

craftyhazelnutspatternedpaper

digistamps4joy

letscreatechallenges.blogspot.co.uk

Cheap dies and Shrinky Dink…. surprisingly pleasing to the eye.

When you are on a budget…and a very tight one…. sometimes you just have to give things a try and hope that cheap doesn’t always equate to “crap”.  Now don’t get me wrong, these imported dies are most often NOT of the same ilk as the big brand names you are used to… BUT for the price… they are pretty dang good.  They probably won’t last as long, but you should easily get your money’s worth out of them.  As you all know I am not a huge flowery cutesie kinda gal, so I’m not going to be using and abusing these as often as some people would.

I ran these through my Big Shot on regular card and on Shrinky dink without any problem… well I say no problem, my Big Shot ( ok..it was probably me lol ) accidentally realigned one of my dies over another and when I ran it through .. you could tell it had bent the back of the die … BUT I have to say in all fairness it still cuts perfectly.

Ok ..sooo here it is a very CAS test card with my new dies.  The flowers were cut on Shrinky Dink and shrunk, then colored with Chameleons and a rhinestone centered glued in place. If you want a smoother look to your coloring.. color THEN shrink.

The foliage was cut on 110lb scrap card stock and has embossing for veins… you just can’t see it in this photo.

Butterfly is a spare Gina Marie Designs cut from the “Butterfly & Beautiful Die set”  that I had and thought suited the 3D nature of this card.
ebay_dies_shrinky_wmd ebay_dies_wmd

 

See this sellers store for more dies

I will be compensated for purchases made through affiliate links on this page

Challenges:

artimpressionsstamps 193-cards-to-die-for

Spotlight Series Day 4 – Carol Clarke, CUP Designer

craftsuprint_aff
Who are you ?

Carol Clarke, I’m a self employed Artist & Designer, wife, mum of 3 & grandma of 6!

Designer Showcase


Where are you ?

I live and work in a village in  Nottinghamshire.  My commute is horrendous … I roll out of bed, stagger down the stairs …. and settle down with my laptop …. absolutely awful I know …. but I mostly manage to get to work on time every day! lol

When did you first start drawing/designing seriously?

 It was around 2006 when I first offered designs for sale but I had been cardmaking for a long while but couldn’t find any designs I liked so I had been drawing my own for a long while …. other cardmakers saw them and wanted to know where to buy them so around 2006 I started putting them on CDs to sell …. and it blossomed from there!!

Dressing_the_Tree


 

 

 

 

What was the first product you ever had for sale?

My earliest products were listed on eBay and those listings are long gone …. but this is the 1st item I offered for sale on Craftsuprint in 2009

“Dressing the Tree”

 

 

 

 

Favorite quote?

My Grandma said ‘Never mind the dust it will still be there when the children have grown up’  She was so right!!

 

 

What’s your guilty pleasure ?

chocolate, chocolate and more chocolate!

On_ the_Beach_Old_Man_Ken

 

 

 

 

 

What is your favorite piece in the whole store?

“Old Man Ken on the Beach” reminds me of my Dad who will be 90 this year and he always wore a string vest and rolled his trousers up on the beach when I was a child.

 

 

 

How many people work with/for you?

Me, me and only me …. unless you count my hubby who keeps me well supplied with coffee throughout the day! lol

 

What  job did you have BEFORE you started  drawing/designing for a living?
 I was a doctor’s receptionist and secretary

 

What’s your favorite color?

Pink …. and I love it even more if it’s got polka dots on it!

 

What was your favorite subject in school…?

I loved art but I had to give it up in the 3rd year as my parents thought needlework would be a better O Level to take.  They were right in that I not only got an A in Needlework but I went on to make my children’s clothes on an old Singer Treadle sewing machine (and knitted/crocheted all their woollies too) which saed me lots of money when they were small.   but it’s ironic that I went on to make my living from Art! I did go back to school and Art College as an Adult returner once my children were older and took 3 GCSE’s and an A level in Art …. getting A’s in all of those too!

 

When no one is listening…. do you sing in the shower?

Oh YES …. unfortunately for anyone who is listening!

 

What is your most popular item in the store/shop?

This Carousel card has been very popular with customers

3DCarousel

 

What’s your favorite craftroom/business supply or tool that you couldn’t live without?

My sticky tape putter onner thingy (otherwise known as an ATG!)

 

When you get the midnight munchies… what do you grab?

Chocolate, love the stuff …. and I’m sure midnight calories don’t count … they don’t … do they???!!

 

How long does the average design/art work take from concept to final product?

It varies from but My On the Shelf Cards was the longest at over a year to get from my head to fruition.  They normally start with an idea or question …. like … Is it possible?   I wonder if I can?  How can I do that?   Will this work? etc

 

When you are working, what is the view from your window like

Looking over the decking and the garden to the fields at the bottom of the garden and then the Derbyshire hills in the distance … we get cows trimming any plants that dare to grow too high! lol

carol_view

 

Who scared you most as a kid when you were being naughty.. your parents or the boogey man?

My parents!!

 

What’s your favorite event, or holiday of the year?

I love Christmas … I have 3 children and 6 grandchildren and it’s a magical time of year especially when viewed though the eyes of a child,

 

Do you plan to grow old gracefully, or disgracefully?

oOOooooo disgracefully … of course!!

Show me the drawing you think most closely resembles you physically or personality-wise 

rambler

3D on the Shelf Card Kit – Little Rambler Lady Martine

Would you go cave diving with sharks?

No No NO!!

What’s your favorite hobby when you want to relax?

I love to walk.  I am lucky to have lovely countryside on my doorstep and I walk a minimum of 2 miles every day.  I call it my green stress buster!

Which drawing/product are you the most proud of in your collection?

It has to be my Original concept On the Shelf cards I have now drawn and uploaded nearly 1900 of them …. And my favourite is always my newest one and today that is a little Irish Dancer. irish  but I also love my older ones like Santa santa  and the fun ones too

sick

 

craftsuprint_banner

 I will be compensated for purchases made through affiliate links on this page

 

Friday Freebie – 3D on the Shelf Card Kit – Gadgets N Gizmos Boy Geff

cup621274_359
This weeks Friday Freebie over at CraftsUprint is this 3D on the Shelf Card Kit – Gadgets N Gizmos Boy Geff kindly donated by Carol Clarke.

Funnily enough… Carol is one of the upcoming spotlight guests too.  If yu haven’t heard about that, click on the “Home” link at the top.

I met Carol last year when I joined CUP and have always loved her card kits.  If you haven’t seen them yet… you should  definitely go look,  She is a fab designer and I don’t know how she does it… but she takes requests for  these on the shelf cards and I don’t think I have ever  seen a request she couldn’t/wouldn’t  do… she’s fabulous .. and the on the shelf series is huge.  And that is not all… she also has these fabulous  countdown to Christmas cards … I made one for my little guy last year.

and be sure to check back for her spotlight  coming up next month.

…also lots of other fab stuff to check out over at CUP… cut files, card  kits, verses..  oh but its 4 am and I am too tired to list it all… go see for yourself.

PS if you like to write… you can earn money from  your sentiments and verses there too 🙂

 I will be compensated for purchases made through affiliate links on this page

 

1 2 3