Tombow USA Black Friday and Cyber Monday Deals

Looking for some great deals on some Dual Brush and Twin Tone marker Tombow Bundles? check out the Black Friday sale starting tomorrow… runs 24-26th.

I will be compensated for purchases made through affiliate links on this page.

Sneaky Peek.. You’ve been Framed !

So.. ready for a sneaky peek at a few more  fancy frames using the Gina Marie Designs Die Collection?  As you can tell I added a few more fun die sets to my collection this week .. so now I have even MORE combinations I can make up and play with.

I just ordered my final missing  die that I REALLY wanted for this project, the Dot Stud Rectangles.   The Dot Studs are the ones with the larger circle cuts…I have the circles now..as you can see in the picture and  already had squares, but Rectangles were  out of stock and I  REALLY REALLY like  the Dot Studs, so I had to go hunt a set down.  I think these are my favorite of all the IN/Out dies….  I hope that gets here soon.

There are so many combinations for this technique… and it’s such a great way to get a Bonus cut from your in and outs… expect to see these  A LOT in projects 🙂

Vintage portrait style watercolored magnet

Well.. what a mix of goodies ended up in this project… I think everything but the kitchen sink lol

This is a new magnet framed with the Gina Marie Designs combo die piece you saw in a post earlier today…  looks a bit different now though LOL.  It had a few layers of Tim Holtz distress ink, followed by two colors of DecoArt Metallic Lustre, a touch more distress ink…. then 3 layers of clear embossing powder.

The image is “Lavish” by Rick St Dennis, which is one of 3 new ones in this style that I picked up last night.  She is printed on Canson Mix Media 9×12icon and colored with Gansai Tambi Watercolors using an H2o Brush.  I mounted the image to a piece of  COHAS magnet using a commercial grade double sided adhesive tape and then attached the frame with Zig 2 Way Glue.

This one will be joined by the other two images who will be turned into magnets too and will be joining my Abandoned Art bucket and abandoned in the coming months.  If you want to lean more about abandoned Art there are links to several Facebook groups on the side of this blog.  It’s all about sharing the happy!

“Lavish” by Rick St Dennis

 

Gina Marie Designs dies

LACEY LATTICE RECTANGLE DIE SET – GINA MARIE DESIGNS

DOUBLE PIERCED RECTANGLE IN AND OUT RECTANGLE DIES – GINA MARIE DESIGNS 






icon







I will be compensated for purchases made through affiliate links on this page


Nesting more dies for pretty frames again

I pulled out two more die sets to play with…. so here you go.. this is a frame made with 2 Gina Marie Designs dies sets. I personally nest and cut these at the same time using my We R Memory Keepers Genius Ultimate Magnetic Platform on my Sizzix Big Shot… but you could cut each die one at a time if you wanted to.  

You will need at least one set of in and out or dual stitched dies to make these.. but you could just use a plain die  if you wanted a simple cut instead of two fancy ones.  Just pay attention to where the cut lines are on your dies.  I single stitched die would give you a simple inside to the frame but give you a stitched panel from the internal cut.. so you still get two usable pieces  🙂

 I’ll pop in  additional posts, as and when I have  fun cut combos to share  🙂


I will be compensated for purchases made through affiliate links on  this page

Gina Marie Designs – In and Out die sets * BONUS CUT !

Now this is something  not everyone has figured out yet about these great dual stitch dies, so I figured I would share… there is actually a THIRD cut. That’s right.. you don’t just get TWO cuts  per die,  if you are sneaky…. you can pull out a 3rd  really cool and useful cut. Just by combing  two of the dies from the set, VOILA.. you now have 3 cuts.



Now let me just say this is not as effective on some of the dies.. specifically the rounded corner ones. as the corner angles are not set up to form a uniform curve on the sizes. Individually you have the perfect corner cuts.. but combined.. it’s not a cut that nests well… saying that if you wanted to do it.. you just get a 3rd funky frame cut.. which you may actually like…. not everyone wants that uniform look.


Ok so what dies am I referring to? not the regular stitched dies.. but the new ones.  Just pop “In and Out” into the search function and you will get to see all of the new  double stitched dies I am referring to.  Now I don’t have ALL of these..and I can’t guarantee that all of the designs will  work for this technique…but if you are buying them anyway for the double cut.. you might as well at least know that a 3rd cut is possible. 🙂


I  can’t show you the full image as it is for an upcoming DT project… but you can get a sneaky peek at part of it, which shows the  traditional inner cut.


Now here is the fun part…. if you nest two of the dies on your cutting plate .. you can see on the left the traditional use, which is the inner and outer cuts… BUT you now have a THIRD cut.  Nesting your dies  gives you this double stitched frame cut too.  I discovered this last year  with my first Dual Stitched dies and  use this 3rd cut a lotWhat a great way to get even more value from dies that are already fantastic value…

Here you can see what I meant about the rounded corner dies… still a cool cut specially if you wanted to decorate the corners, or just wanted something a bit different.  You still get your regular in and out cut.. but the frame.. that’s just a cool unexpected bonus.

These are the 3 sets I just got… now be warned ladies these pierced dies have TINY holes and they are a bit more pernickety than your average die.. but totally worth it for the look you get.  I am really hoping  that Gina Marie Designs release this dual stitch design in more stitches soon.. the larger stud dot  and  all of the various stitches they already have on singles… I am ALL OVER THAT.  I love these dual stitch dies ..  or In & Out as they are called on the GMD descriptions. They need a new name… In & out just doesn’t cover how cool these dies really are lol.

Now I personally found that these cut much better for me on my machine using my Magnetic Platform.  I have read a lot of people complaining about their sizzix Platforms, but I actually picked up a We R Memory Keepers Platform last year on clearance at my local Michaels and it’s fab.  I just run these fiddily dies through back and forth, turn it round and run it through again to make sure I have even pressure. Not all machines cut the same pressure all over.. could be anything from worn bearings, to worn plates..or as in my case last year .. a broken chassis inside that you have no idea is even broken till you strip it down. It worked, but had uneven pressure issues… anyhwo there is a whole post somewhere on here about my little fun and games with my Big shot last year and the Fabulous Customer Service by Sizzix.

As I was saying I just use that WRMK’s magnetic base on these.. I added a card layer below the die and it doesn’t effect the hold of the magnets at all..and then used the thicker top plate from the set.  If you are still having any probs with a clean cut.. be sure to run it through back and forth, rotate  the plates and run it through again..and then  if you have to.. and your project permits.. just rotate  it so the dies go through at an angle.. or 90’s if it fits…. and you shouldn’t have any issues.  The biggest problem is cleaning up the hundreds of tiny cut outs haha.. that stuff gets everywhere.

If you are interested this is the Magnetic Platform I use. QuicKutz® We R Memory Keepers™ Genius Ultimate Magnetic Platform set

I will be compensated for purchases made through affiliate links on this page

Decoupage Wall Plaque “Baby Boy Blues”

I was playing around with ideas again.. you know how that goes LOL.

I picked up some of these cheap wood blanks at Walmart… I only went in for milk honest.

2 gallons of milk and $50 of craft supplies later…. haha ..oops…and I had some fun stuff to play with for me and the lil man.

Now cute isn’t really my thing, but I still like to have a play around with ideas and  try new things…and sometimes I get a does of the “cuties”.  I think that is how you learn what you like and don’t like; sometimes it works, sometimes it doesn’t…. but you will never know unless you try.

What I loved about this one was the soft Wedgewood style color Palette ….what I didn’t love…. sticking on what felt like a gazillion tiny flowers and  pearl cabochons.  But I like how  the flower clusters turned out on it…it’s a very handy die, I just wish it did more than one at a time.  I can see a few places I think I probably should have added a few stray flowers, but it’s so easy to  go too far and OVERKILL strikes  lol.

Anywho here she is, this is my  New Release project for Cute As A Button “My Baby Boy” . The idea would work with a photo instead of a digi image too.

Supplies listed below.

Basics:

Wood Oval Blank – available at Walmart, or any craft store.
Mod Podge Matte & sponge applicator
Image “My Baby Boy” by Cute As A Button
Colored with Chameleon Pens

Card 110lb Georgia Pacific from my scraps box
2 shades of Blue from "Cape Cod" Recollections 65lb  card

Dies:

Gina Marie Designs "X Stitch Rectangle Die Set" ( small flowers )
Gina Marie Designs "Fern Die Set"
Lil'Inkers "Stitched Mats:Oval"
Large Flowers, Foliage, Scroll Foliage Ebay-Wangrea

I will be compensated for purchases made through affiliate links on this page

 

Sympathy card drawn with a Chalk Marker pen on the Cricut Explore

I adapted this CUP cut file to draw the design on my Cricut Explore, as opposed to cutting it.  Love this effect!

I imported the SVG file into Design space, created a duplicate and used the contour feature to create a cut file of the outline, I then switched the original from cut, to write and used a Zig  dual tipped chalk pastel marker pen to draw the design.  I added in some tiny pearl cabochons and a sympathy sentiment die by  Gina Marie Designs.

This would look great done in a black pen  on white then colored with markers too.
cup_sympathy_pearl
I love the versatility of these over the edge card cut files.  This one I re-proportioned to create a square card, instead of the original rectangular card.

Cut File  OVER THE EDGE FLORAL BORDER 10 by Apetroae Stefan

Zig Chalk Pastel Marker ( requires the Chomas Creations marker adapter for use in the Cricut Explore..not available for the ONE)

Gina Marie Designs Sympathy die

Zig 2 way glue

Cricut Explore 

Be sure to grab your Friday Freebie at CraftsUPrint

I will be compensated for purchases made through affiliate links on this page

 

“Catch of the Day” fun fishing themed card

I picked up another fun new cut file in my latest traipse over at CUP,  Tri-Fold Scalloped Top Card by one of my favorite SVG designers, Rae Carr.
cup_fishies

I recently picked up some new Gina Marie Dies “Gone Fishing” and  I had  grabbed this fun image from Bugaboo Stamps called Girlz – wiggle the bait to go with them.  Well as it happens, I have been waiting for  just the right project to use the paper stack I won from DCWV a few months back.. and this was it!  It’s a gorgeous paper stack called Coastal, filled with all sorts of cool  card sheets.. including some pearl foiled and printed linen pages. cup_fishies2 cup_fishies3
I added in a dual stitched frame  using my Lil’Inkers dies and added the catch of the day chalkboard look using a Zig Chalk Pastel Pen.  The inside  net was created using the lattice portion of the Gina Marie Lacey Lattice die set I got a month or so back.  The fish was colored with Tim Holtz Distress ink pads, as was the chalk board frame and the nets and rod.

The base card was cut from a Craft Smith solid color card stack on my Cricut Explore and the image was printed on Canson Mixed Media, then colored with Chameleon Pens.

Adhesives for this project were Zig Photo Tape and Zig 2 way glue.

I was naughty….this was supposed to be my DT project for the new Bugaboo Stamps Challenge starting on the blog in January… but I was impatient to share it.  Soooo…. guess I’ll be doing another project this weekend lol.

Be sure to subscribe to the blog, or follow me on Facebook etc if you want to be alerted to the new challenge.  All you Bugaboo Stamp fans, get your creative juices flowing..  this one is exclusively for Bugaboo Stamps Projects and prizes are sponsored by Bugaboo Stamps every month.  Woo Hoo.. we love our Bugaboo Stamps, so the DT team are a bunch of happy little clams…. and ….we have a new DT  joining us for the Bugaboo Challenge too  🙂

Slightly off topic and I will be posting about this tomorrow  too.. I just had a quick peek  to see what new Gina Marie Dies are available and saw some fab deals on some Deep Red Rubber Stamps ..I was drooling over the vintage ones… specially at those prices.  They will be fab for my vintage/steampunk backgrounds.  AND for any of you old Cricut Explore owners who never got the Bluetooth Adapter... I also saw they have a handful of them available .. $10…… so if you always wanted one.. now’s the time to go grab one, they don’t have many in stock.

I will be compensated for purchases made through affiliate links on this page

 

Die Cut Vellum windowed feminine floral card

ooh aint that a mouthful …..

In a nutshell …..its a soft and girlie card, with lots of cool vellum on it….and some cool dies by Gina Marie Designs and Lil’Inkers and a cool cut file from CraftsUPrint Designer Tina Fallon a bit of Gelly Roll Stardust and rhinestone bling and a swipe of Chameleon pens… I’ll add links below for anyone interested in specifics.  This particular file was cut on my Cricut, but it is available in various formats for different Machines.

For those of you who are regulars here.. DON’T PANIC!!!!  I am also working on a really cool black and red gothic type verison of this ..I was not abducted lol.

cup_flower2_wmdedcup_flowers_wmdedVellum Paper  12×12 sheets from Michaels

Card base Recollections White card pack from Michaels

Stitched window Lil’Inker Designs Dual Stitched Rectangles

Large flowers Flower Ranunculus – Peony 3D Flower

Small flowers  Gina Marie Designs X stitched Rectangle dies, bonus center die cuts

Foliage Gina Marie Designs- Fern

Foliage Color  Chameleon Pens on vellum

Flower centers  rhinestone bling and beads.

Flower edging Sakura Gelly Roll Stardust pen

Glues and tape Zig Photo Tape and a white glue from www.quilling.com

Cut file format SVG cut on a Cricut Explore, various formats available.

Die Cut Machine for metal dies    Sizzix Big Shot

I will be compensated for purchases made through affiliate links on this page

 

Cute manga style magnet

I was playing around with my magnetic sheet from CraftingAbility again…  this one was die cut using a dual stitched set. Only the frame is magnetic, keeping it lightweight and economical.  I used the center portion on another project which I posted a few days ago. You may have read about the possibility of grab bags coming available… and this would be perfect for these kind of projects.

She may end up being another “abandoned art” project… we shall see 🙂

SD_FF_magnet_wmd

Image – Scrapper’s Delights Sakura 1
Printed on Georgia Pacific110lb Index card
Colored with a mix of Chameleon, Zig Kurecolor  and some Marvy detailer.
Hearts are  punched from SEI red velvet paper
Adhesives used are  Kuretake Photo tape  and a white glue
Front panel was a scrap cut of Grafix Dura-Lar acetate
Magnetic Frame   –  magnetic sheet by ImageAbility available at Ziggyboard.com
Dual Stitched dies  by Lil’Inker Designs

SDFF_Aug5

 

 

 

This is the current image for the Progressive Challenge… grab yours and come join us 🙂

Scrapper’s Delights Facebook Group

Scrapper’s Delights Store

Scrapper’s Delights Challenge Blog

 

 

Challenges entered:

classicdesignteamchallenge

thesistersofcraft.blogspot

yourscrapbookplace.blogspot

digistamps4joy-sa.blogspot

 

I will be compensated for purchase made through affiliate links on this page

 

1 2 3