Mixing it up a lil’ with some fun new cut files.

Well there was a bit of everything in today’s crafty fun… Magnets, resin, Velvet paper, stickers, cut files, glue, enamel dots…and some window cling.  Not too bad for someone who hasn’t crafted for a while lol.

I was having fun with some new CUP files. These cut files make great backgrounds  and stencils for allsorts of projects.

Lizzie Mayne’s  Gears & Cogs Frame Card  …starting off with Captain Locke by KennyK, she’s a digital coloring I did  a while back  printed and mounted on silver foil paper and then a Cohas Magnetic Sheet cut  on the Cricut. I only used the front portion of the card file… but this comes in square and rectangle as full card files.

Lizzie Mayne – Cornish Grid 3. I had a lot of fun with this Black on Black project..Cohas Magnet Sheet, Black SEI Velvet paper, Black glitter resin Skull and some Black Gina Marie Designs enamel dots.  Nothing like mixing it up a lil’ haha.. but a pain in the hoo ha to photograph an all black project with various finishes haha


Lizzie Mayne – Dhalia Flower Mat Layer Stencil. This one was fun..I cut just one of the  3 layers in this cut file using  that fab velvet paper. Mounted it on card, then colored it with Zig Clean Color pens and a touch of Chameleon Pens.  I cut that out and sliced it in half …stuck it on this plain black envelope and then stamped some fun typewriter and text stamps in a faded white ink.
Just a fun way to decorate envelopes if you are sending a hand written letter, or just need an envelope and don’t want to be bo-ring!

Lizzie Mayne  –  Brick Wave Matt Layer Stencil.  Such a fun card to make.. it’s the perfect kinda project to do with the kids, or grandkids High contrast, super fast, super easy… cut file, some glue, envelope and a card and some fun stickers… and voila.. one High contrast cute card ready to go.  Makes a fun  card for any occasion.


Judith Henry- Lattice Hearts Embellishments. I cut this heart in Cricut Window vinyl and will be putting it on my new car… this is just one of the hearts included in the cut file.  I love how well this vinyl cuts on intricate designs and fine lines.

 

I will be compensated for purchases made through affiliate links on this page

Oriental lacquer meets playdoh

playdoh_fin_frame2

 

Well here it is.. the final piece.  I sat on this a few days contemplating whether to do anything more to this piece

 

… and I decided in the end that I  like it the way it was and anything extra would be overkill.

 

 

 

playdoh_fin_base

This is a project that  you can do with your kids or by yourself.. obviously the variety in styles and tastes make this a great way to incorporate this  idea into any Decor style depending on the recipient.

I think I will try a more sedate softer style on my next piece… not because I like it.. but just to see  how different it can be.

Now let me be clear, if you haven’t already figured this  out for yourselves.. I’m not a big fan of “perfection” I kinda like quirky and character. These Playdoh pieces were not pressed and punched perfectly, they aren’t all uniform thickness ..some have chunks missing, cracks, detail is lopsided.

My son helped press these and I don’t care that they aren’t perfect… they are perfect to me, because he did  them  with me.

playdoh_plain

So  that said… you can, if it’s your thing.. roll this Playdoh out perfectly, re-roll anything that doesn’t punch perfectly and imprint perfectly… you can redo anything that has a crack, or a chunk missing or ..whatever imperfections you don’t want on your projects…

I’m not looking for everyone to go WOW.. her project is  awesome.

I just want you to go.. WOW.. you can do stuff like that with crappy old Playdoh?

 

It’s impossible to appeal to everyone’s tastes all of the time, but it’s not impossible to appeal to someone’s creativity and imagination.  So when you look at this…. look at the ideas and consider what you could do within your own taste in color and styles.   Imagine how different this would look if it were just grouped in one corner on a distressed frame done in pastels …or a red frame with white flowers.. can you say BOLD !!!

 

So ignore the colors and the layout and .. hell just ignore all of it and let your imagination run wild.  Oh the crazy things you could do !

 

playdoh_frame_plainframe_playdohplaydoh_fin_closeupplaydoh_fin_frame

 

 

 

 

 

 

And now for the really technical bits…

MDF frame I had kicking around, it came from Michaels a few years ago
Old mixed up Playdoh
Fondant icing plunger cutters from Hobby Lobby
Black enamel spray paint I had kicking around
Wink of Luna metallic pens ..sorry Steve… I know I know they aren’t meant for Playdoh…. but they work so well LOL
Rubber stamps for scroll work

Are you ready ??.. play close attention this gets very technical…..

  1.  Dig out some old Playdoh
  2. Roll out said old Playdoh
  3. cut, plunge, press  and release  ..sounds like an animal program for stray cats lol
  4. Throw it on a baking sheet
  5. Bake at the lowest temp your oven will allow for at least 4 hours…, or let it air dry.  Set a timer on the  oven… It won’t hurt the Playdoh to forget about it at that temp… but you might as well save your electric right.  Yeah I forgot about mine and baked it for a good 8 or so hours lol ..DOH! Now the next steps depend entirely on your project and the effect you are after.  If you want a different color background…. Spray your flowers, shapes etc. and decorate the background BEFORE gluing them on.. I wanted all black, so I glued then sprayed.

Once it was dry, I simply ran some Wink of Luna markers over them to pick up the pattern on the Playdoh. If you don’t have those; you could use acrylic paints and rub it over with a stiff brush, or use your finger.. just to highlight.  Once that was done I used ..again.. sorry Steve *grin… Wink of Luna markers to coat some rubber stamp scrolls and slapped them on there….and I do mean slapped.

Remember I had pre-glued my flowers etc, so there was no way to use a stamp block.  It wasn’t meant to look “perfectly” stamped..

And there it is.. another fun way to use crappy old Playdoh.  I bet this would work great on a Victorian style lace and pearls frame in pinks and creams ..or a box frame.

ooh the possibilities

Wink of Luna pens and playdoh

Just a real quick post… I am working on Part II of my recycling old playdoh post… and one of the  pieces I am decorating to use on the final projects..well it just looked so cool I had to share.  You will see more pieces later when the post is complete…. but for now, check this out.

That nasty old playdoh on the left was run through a Darice Embossing folder and left to dry after a quick 15 minute low bake in the oven to hurry it up a bit, it’s still a bit flexible..it almost has a tough old leather feel and flexibility to it.  I sprayed it with a black enamel spray and then I ran my new Wink of Luna metallic copper pen over it horizontally…. the  bits where I over shot the raised design… no brainer. I just rubbed it in with my finger and created that old rubbed bronze look.  This is going to be really cool for creating steampunk themed crafts….and if you are a follower, or message board member, you already know how much I love my kennyk steampunk digis.

My wink of Luna pen was provided  free of charge by www.winkofstella.com for an upcoming review. This is NOT my review. I just happen to have used it for another great project before I got started on it haha…. so look forward to seeing my review  on wink of Luna and wink of Stella pens coming soon 🙂

playdoh_oldplaydoh_enamel_luna