StazOn-stays on acetate, unless you need to wipe it off :)

stazon

I have never bought this brand before, but had read that it was the best one for stamping on acetate.. so armed with my 40% coupon.  I went to Michaels to get some StazOn and happened to find one un-opened pack of Grafix Dura Lar on the shelf. Not sure if it was the thickness I was looking for, I was hesitant.. but a gals gotta try these things right  LOL.

duralar

 

 

Now in my local store this is  kept with the art pads,  not near the inks, stamps and papercrafting section… and the front of the pad on Michaels.com is not the same as the pad I bought.  Mine looks like the one pictured left.  It is 9×12 and 0.05 thickness.

I didn’t think it was really going to stand up unassisted by a card frame… but I scored it anyway and damned if the  fully acetate, top folded card didn’t stand up just fine …. ๐Ÿ™‚



 

Now the ink… that is definitely interesting.  I was not expecting it to smell of almonds, but sure as hell when I unwrapped it  I had a sudden flashback to my cooking class in school the year we made Christmas cakes.  It smells like Marzipan  LOL.  I was a bit dissapointed to find that almost all of the craft stores do not carry this ink in many colors, it’s mostly only available online…. Michaels only had Black and Brown.  BUT I just had a quick search and it appears you can get  Stazon Opaque  White at Joann, so I may have to take a wander over to my local store and see if I can pick that up while they have a good coupon available.

anywho..back to the StazOn ink on acetate

So you bit the bullet and bought some acetate and decided to try stamping on it using StazOn… looks great….dries almost instantly, doesn’t smudge.  Fantastic….And then it happens… you slip slide and blur your stamping *sigh  there goes a nice piece of acetate right?…. WRONG!

If you are new to Acetate, or StazOn like I am….and of course some of you are already old hands at this so will shrug and  think.. “what, you didn’t know that *rolleyes ”   lol

.. but for the rest of us .. “no .. we didn’t”.

Never fear, Walmart is your friend.  I have a $2 bottle of 91% Isoprpyl alchol from the pharmacy section that I use for all sorts of projects and as a blender sometimes for my alcohol markers.  Just pour some of that one and it will lift that ink right off and you can rescue that acetate and redo your stamp. Just bear in mind what you are using to wipe it off and don’t scratch your acetate

It works great on my shaker card windows too… so I can see me having some fun with this new ink ๐Ÿ™‚

…..so if you mess up stamping on acetate with your StazOn…. you can clean it off and have a do-over.


From my quick little test.. THUMBS UP for StazOn, I like this ink a lot ๐Ÿ™‚


How to clean and restick old Cricut cutting mats

These are  questions that comes up a gazillion times with Cricut Explore users…  how do I clean my mats and what can I do to make them sticky again?

Condensed version for impatient peoples in a hurry:

 

  • Scrape off stuck card/paper with old credit card, or Cricut scraper
  • Clean mat with warm soapy water, leave to dry

    Congratulations… clean mats again.

 

  • Take gross old mat, scrub with Isopropyl alcohol and an old face clothe.
  • Rinse and leave to dry
  • Apply thin coat of Kuretake Zig 2 way glue
  • Wait till  glue turns from blue to clear

    Congratulations… sticky mats again.

However if you mats are creased, or sliced .. it’s just time to buy some new ones. I always have a stash of spare mats, I grab them when Cricut have sales ๐Ÿ™‚

Now here’s the longwinded version for anyone who cares lol.

… well  here’s the answer to at least one of your problems.   First off let me just say that the mat I tested this on was “NASTY”  lol.  I had thrown it in a corner as no longer viable as a cutting mat and  it was in my pile of old mats I use for  various other things…. like protecting surfaces while I cut, glue, paint etc.  They may not be much use on my Cricut, but they are useful enough to keep for other purposes.

Usually when I “clean” my mats..I use an old credit card to scrape off any card or paper that is stuck to the mat and carry on my merry way.  When they get too grungy I run them under warm water with a bit of soap and a terry face clothe, when those two options no longer produce workable results… they are  relegated to the “other uses” pile.

Kuretake

 

So.. onto the no longer sticky problem… CraftingAbility sent me  this rather handy little glue stick in my latest package. It comes in various tip sizes depending on what your needs are.  This particular one is the  Zig Memory system 2 way glue  with the Jumbo 15mm tip.  My mat was gross….  cat hair, old paper residue, dust ..you name it, that had got suck on it over the months lol.  I have 4 cats  who just love to sleep on my craft space… so my good mats hang on a hook on the wall.  The old ones however get thrown in a stack..and since I am usually using the back side of them. I’m not overly concerned with what sticks to the front. Even when they lose their usefulness for cutting, they are still sticky enough to pick up all that crap.

 

So.. I grabbed an old mat to try this out with… I have heard a lot of great things about this glue, but I won’t lie… I really wasn’t expecting much as far as results go.  I’ve never had a 2 way glue that worked that well, so I was expecting it to be ….ok, but nothing great.


Warm water, soap and a rag weren’t going to cut it with this mat, so I grabbed my trusty bottle of alcohol and threw it on the mat.  Like magic all the crud was coming off….I was quite impressed by that, even if I wasn’t expecting great results with my mat experiment.  I figured the best way to tell was definitely to work with the cleanest old mat I could;  so I scrubbed it clean with alcohol, rinsed it off and left it to dry. Funnily enough it actually had a touch of tacky still on it after the alcohol cleaned it all up.  But definitely not enough for a run through my Cricut.

cricut_mat1

So now we are left with a clean-ish old mat.  You can still see the designs that scored into the mat from previous projects, but it was actually green again lol.  At a quick glance it almost looked like a new mat… score!

 

Ok so these  2 way glues, how they work is first off… you need to prime your glue.  The tip is dry when it arrives and priming it is very simple. Press the tip up and down on a scrap of paper.. you will see the tip nearest the body start to turn blue.  Don’t get too over excited and pump it like crazy…. that blue is the glue soaking down to the tip.  Once it has soaked all the way to the tip, you are ready to Rock n Roll.

Now one important thing to remember, DON’T get glue where your Cricut rollers go along the sides. I just masked mine off with a bit of scrap car to test this out on a section of the mat… but if you are doing a mat entirely, you might want to use some masking tape.  The glue goes on blue when wet, simply apply and wait till it turns clear… and VOILA.. sticky mats again.

cricut_mat2I have to say ….I am suitably impressed with this glue.  It’s sticky enough for anything I use on a regular basis…. 110lb card stock  etc.  It doesn’t leave any residue on the back of my project after removal.  I think I have to give this one a thumbs up.

Good Job Kuretake, yet another fab product to add to my growing collection of Zig craft supplies.  Only problem is I have a pile of about 15 old mats I now need to clean off and reapply sticky to lol.

If you are still unsure about this glue… stay tuned for two more uses I found for it while I was playing around… I know I for one will be keeping a bottle of this in my stash from now on ๐Ÿ™‚ along with the new tape runner I also got to play with in this box.

 

 

The glue used in this post was provided free of charge for test and review purposes

explore-one-openJoin the Cricut affiliate program!

 


I will be compensated for purchases made using affilaite links on this page

Woo hoo..Sizzix replacement parts arrived today

sizzix_parts
I am so doing a happy dance… I called Thursday, they were in the mail Friday and I have them today. Admittedly late in the day, but that was our fault for not checking mail till late LOL

I shall be rockin and rolling in no time… 4 new bearings and a crank shaft ๐Ÿ™‚ Now I just need to read the instructions in the emails and I am back in business.

Fab service Sizzix

Read Original Post!


Sizzix Customer Service is Awesome

I’d been having a problem with uneven pressure on my Big Shot, read a few googled posts about damaged bearings and replacing them being the fix.. So I contacted them about it.
In less than an hour I had a response to my support ticket, a phone call.. which went to voicemail…I don’t answer unknown calls and wasn’t expecting a call from them LOL. I responded to the email ticket and literally within minutes had another call..which I answered since I now knew it was them.

During the call  I mentioned that my handle had always been loose … now I am really glad I never glued that screw in  now I have to replace parts LOL ..and that I had opened it up to check the bearings and that I noticed the crank handle cog had a tooth that had broken off.

The Customer Support lady was awesome…. she had me fixed up with a replacement parts requisition and instructions for all of it in no time.  She even checked to make sure I had an allen key to use when I got my new handle axel…. since I don’t currently need one to remove it, with it being so loose and all lol.

5 minutes later I got a follow up call from her to tell me they were out of one of the parts and an expected date for those….. and to beat it all.. she was going to personally check to see if she could locate some parts for me, so I didn’t have to wait for the new shipment.

Now THAT is customer service at it’s best.

I was expecting a 24- 48 turnaround time for a response, which is about the average nowadays… I know I got real lucky and caught them at a good time… but less than 2 hours to get it all sorted is fab.

big shot pro

Big Shot Pro…. I wish !!!!



Kudos to Sizzix for fabulous Customer Service.


Now if they could just slip in a “replacement” Big Shot Pro  and have it all delivered in the same time frame we got the problem sorted…. I would be in heaven.  I love my Big Shot…. can’t wait to have her up and running again.




This post contains affiliate links




Gel pen fix… must read !

captain_crafterI think we have all had those pens that we have picked up to try and thought Uggg…. and thrown them in a drawer never to be seen again. Check out this fab post by Captain Crafter about resurrecting white gel pens. ย I have a few laying around that I tried before I found Gelly roll pens that I may try this out with.

Theyย weren’t very successful straight out of the packet.. it would be great if I could get some of those working.

Thanks Captain Crafter!