Mommy’s weekly specials! Menu for my picky eater

I was having fun playing with my Cohas adhesive Vinyl chalkboard again and made a sign to hang up outside of my kitchen.  My lil guy can be a fussy eater, so I thought I would make him a fun  menu so he could help meal plan.  This is just a flat canvas panel, covered in chalkboard vinyl and a couple of strips of ribbon… and I added  Beer and Barbeque Lady Digital Stamp,   but colored the bottle to look like Ketchup.  The image is colored with Zig Kurecolor markers.

Cohas Chalkboard vinyl 12 x12 sheets (formerly Ziggyboard)

Zig Chalk Pens

Zig Kurecolor Alcohol Markers

Beer and Barbeque Lady Digital Stamp

 

I will be compensated for purchases made through affiliate links on this page

Layers, layers and more layers … & that was just the background!

If you ever have an idle moment and have never tried this.. you should give this a shot lol. This will keep you out of mischief….and so will reading this epic length War ‘N’ Peace blog post haha.

7 layers for the frame, tag on another one if you include the fancy corner.. 2 layers for the butterfly and another 6 layers for the  bouquet…. THAT’S A LOTTA LAYERS lol.

But when it really comes down to it.. the worst part is getting everything on straight, oh and deciding which flowers come  to the front and need the most layers lol.   I have to say of all the 3D projects I have done, this image was probably the easier  when it came to  figuring out how to cut the layers.

7 Print and cut sheets on my Cricut later…  and I have the start of my card.  I colored one completely, I like to do that as a reference when I come to build the actual project… plus it gives me a colored piece to use on another project later ..score!

So I colored one… then started  working out my layers while the Cricut was cutting two silhouettes out for sandwiching between the bottom two layers.  Normally I pop my 3D projects with Darice adhesive foam sheet, but I wanted this one to be a bit more subtle…so I sandwiched a few black sheets in for a little additional depth. The final layer of a single flower is missing off this photo.. DOH

pp_3d_layers_wmd

Once I had all my  Cricut cuts done, I started to hand cut away the pieces I didn’t need on each layer.  When I am doing a one off project, I just fussy cut by hand after cutting the main image.  If I am doing multiples I make cut files for my Cricut.  So I fussy cut  my top 5 layers  and then started to color each layer, starting with  the  top.  when I use Darice foam I tend  to to color around the edges of  the  layer below a bit so it won’t show  when assembled..but with subtle layers like these I just  ink up the white edges with a marker.

Once I had it all trimmed up and colored.. next came the hard part… what to mount it on. Now I  like to take a photo, or scan and import it into my graphics program at this point..for several reasons.  A: I like to be able to grab a cuppa and sit back and just look at it and see where I missed blending, coloring etc… for some reason I have a more critical eye  when viewing it that way. B: I like to play around with layout ideas and rather than waste time cutting and trying ideas and potentially wasting a lot of  card…  the girls on the message board will tell you.. me and pattern paper .. not a good mix lol.  I envy you ladies who can pick and mix and match patterns and colors with ease.  I am not sure if it’s my limited choice of papers, or just that it’s not  ever been my taste..but  good lord it’s like pulling teeth lol.

pp_3d_bwcomp

I started off simply by  putting my original coloring on a white  piece of card and the 3D layers on a black piece… but liked them both for different reasons.. so that was no help lol. So my next move was layers and frames/borders.  I just kept tweaking and adding borders to my image in a graphics program till I started to get a look I liked.

This was my digital rendering

pp_3d_framed_ty_wmd

Once I had a basic idea of how I wanted the frame to look…. that is when I grabbed my cutter and some black and white card and started cutting all those layers.  When I got them all cut, I  took a sheet of 11×17 white card and scored it to make my card base and started layering on the cuts to build the frame (unglued at this stage).  Then it happened…. for some reason it just felt flat, so there I was digging around in my paper cabinet looking for my Black and white collection.  Funnily enough the polka dot paper is the first one I tried … 4 patterns later.. yup I was back to Polka Dots lol.  It just seems classy to me, I did a curtain fold card last  year  in the polka dots and it looked great… so dots it was!

I attached that to the card base with a half inch overlap  at the top, which gives a nice neat look to the top and back of the card. and then came that  time … yes THAT time…  the one where  I always end up gluing all my frames down  skewy.  I blame it on my computer glasses, they aren’t designed for crafting haha.  Just as well for the most part I like to  have my frames tilted on projects lol.  But for this one I needed straight and centered and all that fun stuff…. It’s not perfect, but I think it came out pretty good.  I used my paper cutter to help keep me aligned…yay for paper cutters!!

Ok so all the base layers were on, the flowers layers were all cut, colored and assembled… so on they went.  I had an idea to add the butterfly, but wanted to do a ghost layer. So I actually cut two at once so that the black layer wouldn’t cut all the way through, it is more like a solid embossed layer.  Sometimes if I want to be funky, I do this  double layer cut so the  cutouts from one meld into other layer for a two tone embossed look… it’s kinda cool. Unpredictable at times so a touch of glue is necessary haha… but still looks cool and worth the extra effort.  I’ll maybe show that another time if anyone is interested.

So there was my butterfly…but where to pop it…. top right or bottom left????   I couldn’t decide so asked hubby…. his response… and I had to laugh.  “Top right, I always see Butterflies at the top of flowers… not at the bottom”  He is such a practical wee soul at times, no artistic license or sense from that direction lol.  So  on it went..where butterflies apparently should be lol.

pp_3dframed_watermarkedI didn’t have a particular recipient or occasion in mind, so I am  leaving that blank for now… hence the big space on the left.

So I thought I was done..YAY me.  But  the more I looked at it as I took the photos for this post… I couldn’t help but feel something was missing, it just didn’t seem quite balanced.

Enter Sammy and her fabulous Corner dies to the rescue.  I just happened to have that one single corner cut in my  cuts organizer… BINGO… now I am done!

pp_3d_famed_corner_wmd

Hope you like it 🙂

Base card: Neenah 11×17 110lb Index card
Polka Dot Paper: Recollections Black & White Paper pad
Black and white frame layers: Recollections 65lb solid color packs
Fancy Corner:  My Little Paper World Corner Die  –  8 die set  (Group buy for US option available)
Image: COUNTRYSIDE BOUQUET DIGITAL STAMP SET by Power Poppy
Butterfly:  Gina Marie Designs Butterfly & Beautiful Die set
Colored with: Chameleon Pens
Glue:  Tombow Aqua & Zig Photo Tape
Cutting tools:  Cricut Explore, Sizzix Big Shot ….and scissors

I will be compensated for purchases made through affiliate links on this page

Challenges:

corrosivechallengesbyjanet.blogspot

lilpatchofcraftyfriends.blogspot

abitmoretimetocraft

creativecraftcottage

artimpressionsstamps 193-cards-to-die-for

livelaughstamp.blogspot

craftyhazelnutspatternedpaper

digistamps4joy

letscreatechallenges.blogspot.co.uk

Essential item – the Crafter’s Toothbrush

I just got a fab new  Gina Marie Die today, well two actually and  a few more on the way lol…. but that is a whole nother blog post.  Today I want to introduce you to this one particular die.   Ok, so what has that got to do with Crafter’s Toothbrushes I hear you mumble… and what the hell is a “Crafter’s Toothbrush” anyway!!  something crazy, new and expensive that I just have to add to my craftroom??

Never fear….we shall get there…. be patient grasshoppers.  This is more for the new crafter’s, but may be useful to some seasoned veterans who haven’t already discovered it.

The new die I  got today is this one  “LACEY LATTICE RECTANGLE DIE SET”

gmd_latticeI have to admit I did get a good giggle from the description… not only do I love Gina’s Designs and her prices are fabulous… but she’s honest to a fault lol.

“PLEASE NOTE!  The inner lattice panel is VERY tiny and petite.  That means you could need to shim or use a precision plate and that there will be LOTS of little pieces.  I like to be honest about my products.  It is a beautiful set and cuts great you just need to have knowledge to make it work best with your machine.”

Now we all have those dies that have  the most gorgeous designs,  but take forever to weed out the offcuts…   well you might…. LOL .. NOT ME haha.

I have the almighty Crafters Toothbrush.

Ok enough messing around…   a quickie video to show you all how quick and easy it is to clean up these  gorgeous intricate cuts. My regular Sizzix cutting plates are shall we say a tad worn and as warped as I am….so you wouldn’t really see much, so I skipped right to the clean up.

I ran my new dies through my Big shot on said old and warped plates… no shims needed, using 110lb card stock.  I  popped them  out of the Big Shot, now pay attention… this really helps.. DO NOT pop them out of the dies.  If they pop out anyway.. not a huge deal.. but it’s quicker if you keep them in the dies. Specially if you didn’t get a good, clean all over pressure cut the first time round.

Flip that baby over die side up  and here comes the Crafters Toothbrush … old, new, electronic, Colgate, mickey mouse .. who cares… grab a toothbrush and  brush the back side of your dies…and watch those tiny pieces pop right out.

(no audio needed unless you have a toothbrush fetish ..I recorded this last night while everyone was in bed ..so no voice overs) 

If you have a few reluctant ones…   you can used the  brush in an up and down motion to pop them out.  For those overly reluctant ones that didn’t get enough pressure, I find a quick re-run through my Big Shot will fix that right up… then flip and continue with your tooth brush.

When all of your weeding is done… pop the cut out of the die and there you go.. one clean die cut lacy piece..  nice n easy 🙂

Always keep a toothbrush in your tool  box…. 🙂

New Projects coming over the weekend with the new Gina Marie Designs dies  that just arrived in the mail 🙂

Scrappers Delight Cupid Card

cupid
I kept it super simple with this one… She is mounted on a foam pad. The glitter frame is cut with a Lil’Inkers Dual stitch die and the hearts were just a mini punch from Michaels I borrowed from my toddlers punches.. and the off cuts from a Fiskars border punch.


Cupid was colored with a mix of Chameleon Pens, Zig Memory system writers and brushes, Zig Kurecolor and Ranger Distress pens. The top and bottom of the image sheet was fussy cut so I could drop the frame over to top of the sheet. She is still intact and part of the background… not a total cut out layer.


She’s mounted on a folded 8.5×11 sheet of red card..and sentiment free until needed. She’ll have a matching Envelope with Red Hearts 🙂



Fun Image, enjoyed coloring her. She was a freebie over on the Scrappers Delights Facebook Group page


Club KennyK Facebook Challenge #1 1/15/16-1/30/16

kkbiker_wm
This was a fun card to do…. ya’all know I love me some KennyK.

I started off with one of my practice sheets… colored with Chameleon, Zig KureColor, Ranger distress pens and a touch of Zig Memory system pens.  It’s printed on 110lb Card stock

Image is Chicos Chopper

 
kk_biker2wm

Image was then measured up to a frame… and fussy cut for the emerging front wheel.   Slight cuts into the remaining image allowed me to slide it onto and over the edge of the frame and allow the rest to slide behind to be glued in place.
The frame and image were then mounted on a second piece of card for support and a double edged look, and then foam popped on a rectangular piece of adhesive foam sheet for height.

 

 

 

kkkrewchallenge2016



The framed image was then mounted on a card which I ran through a Darice striped folder, and then dry inked to give an industrial corrugated metal type look using white Memento ink.

The outer frame was inked to match and then 4 brads/studs added just for fun.

Card suitable for a variety of occasions..so no sentiment till needed.  Would make a great card for someone just passing their Bike test  LOL…