Mixing it up a lil’ with some fun new cut files.

Well there was a bit of everything in today’s crafty fun… Magnets, resin, Velvet paper, stickers, cut files, glue, enamel dots…and some window cling.  Not too bad for someone who hasn’t crafted for a while lol.

I was having fun with some new CUP files. These cut files make great backgrounds  and stencils for allsorts of projects.

Lizzie Mayne’s  Gears & Cogs Frame Card  …starting off with Captain Locke by KennyK, she’s a digital coloring I did  a while back  printed and mounted on silver foil paper and then a Cohas Magnetic Sheet cut  on the Cricut. I only used the front portion of the card file… but this comes in square and rectangle as full card files.

Lizzie Mayne – Cornish Grid 3. I had a lot of fun with this Black on Black project..Cohas Magnet Sheet, Black SEI Velvet paper, Black glitter resin Skull and some Black Gina Marie Designs enamel dots.  Nothing like mixing it up a lil’ haha.. but a pain in the hoo ha to photograph an all black project with various finishes haha


Lizzie Mayne – Dhalia Flower Mat Layer Stencil. This one was fun..I cut just one of the  3 layers in this cut file using  that fab velvet paper. Mounted it on card, then colored it with Zig Clean Color pens and a touch of Chameleon Pens.  I cut that out and sliced it in half …stuck it on this plain black envelope and then stamped some fun typewriter and text stamps in a faded white ink.
Just a fun way to decorate envelopes if you are sending a hand written letter, or just need an envelope and don’t want to be bo-ring!

Lizzie Mayne  –  Brick Wave Matt Layer Stencil.  Such a fun card to make.. it’s the perfect kinda project to do with the kids, or grandkids High contrast, super fast, super easy… cut file, some glue, envelope and a card and some fun stickers… and voila.. one High contrast cute card ready to go.  Makes a fun  card for any occasion.


Judith Henry- Lattice Hearts Embellishments. I cut this heart in Cricut Window vinyl and will be putting it on my new car… this is just one of the hearts included in the cut file.  I love how well this vinyl cuts on intricate designs and fine lines.

 

I will be compensated for purchases made through affiliate links on this page

Vintage portrait style watercolored magnet

Well.. what a mix of goodies ended up in this project… I think everything but the kitchen sink lol

This is a new magnet framed with the Gina Marie Designs combo die piece you saw in a post earlier today…  looks a bit different now though LOL.  It had a few layers of Tim Holtz distress ink, followed by two colors of DecoArt Metallic Lustre, a touch more distress ink…. then 3 layers of clear embossing powder.

The image is “Lavish” by Rick St Dennis, which is one of 3 new ones in this style that I picked up last night.  She is printed on Canson Mix Media 9×12icon and colored with Gansai Tambi Watercolors using an H2o Brush.  I mounted the image to a piece of  COHAS magnet using a commercial grade double sided adhesive tape and then attached the frame with Zig 2 Way Glue.

This one will be joined by the other two images who will be turned into magnets too and will be joining my Abandoned Art bucket and abandoned in the coming months.  If you want to lean more about abandoned Art there are links to several Facebook groups on the side of this blog.  It’s all about sharing the happy!

“Lavish” by Rick St Dennis

 

Gina Marie Designs dies

LACEY LATTICE RECTANGLE DIE SET – GINA MARIE DESIGNS

DOUBLE PIERCED RECTANGLE IN AND OUT RECTANGLE DIES – GINA MARIE DESIGNS 






icon







I will be compensated for purchases made through affiliate links on this page


Nesting more dies for pretty frames again

I pulled out two more die sets to play with…. so here you go.. this is a frame made with 2 Gina Marie Designs dies sets. I personally nest and cut these at the same time using my We R Memory Keepers Genius Ultimate Magnetic Platform on my Sizzix Big Shot… but you could cut each die one at a time if you wanted to.  

You will need at least one set of in and out or dual stitched dies to make these.. but you could just use a plain die  if you wanted a simple cut instead of two fancy ones.  Just pay attention to where the cut lines are on your dies.  I single stitched die would give you a simple inside to the frame but give you a stitched panel from the internal cut.. so you still get two usable pieces  🙂

 I’ll pop in  additional posts, as and when I have  fun cut combos to share  🙂


I will be compensated for purchases made through affiliate links on  this page

Who doesn’t love a baby elephant?

Here is card No.1 of 2 for the newest Crafty Awesomeness Challenge which is sponsored by.. Sasayaki Glitter this month. The team got to choose two images.. so being a team of 4 .. we let two of the girls pick an image this month and the other two will choose next time. We’ve been friends so long now, that we know each other well enough to know what images we can all work with.. and which ones we can  choose to give the others a  nudge outside the box..without going too  far… * cough haha that would be me LOL

So here she is… I say she, simply because I gave her pink toe nails and a pink bow.  I have plans to make a  few more of these in blue and gender neutral colors too, it’s just such a cute image and perfect for baby showers, 1st birthdays, gender reveals,announcements etc.

This is Baby Elly’s Birthday by Sasayaki Glitter
Printed on an Epson Ecotank on Canson Mix Media  paper
Colored with  Crayola Color Escapes pencils and blended with Isopropyl alcohol.
The image was then cut with a Gina Marie Designs Die from the “LACEY LATTICE RECTANGLE DIE SET”  on the Sizzix Big Shot ( check out my post about this set &  the crafters toothbrush here )
Attached with Zig Kuretake Photo Tape

A very soft and cutesie CAS (clean and Simple)card….

 

I will be compensated for purchases made through affiliate links on this page

Thou shall hev a fishy on a little dishy…..

Ok..are you ready for this one? LOL.

I am a creature of moods and I already  kinda jumped the gun a few weeks ago and got over zealous and posted what ‘should’ have been my DT project. I  liked it so much I couldn’t wait to share, which is great.. except that left me needing to do a second project.  I was desperately trying to come up with  something I really wanted to do and of course ….I got sidetracked coloring Roosters and cutting cut files and all that other fun stuff… like you do LOL

So here I am, or was ….  half a day left to pull off a Project… and my lil guy wanted to go out. So off we went to Michaels and then Toys R Us and while I was there I picked up some stamps for him and some bits n bobs for me ….INCLUDING  something I had wanted to try for ages.

I had been wanting to make a Chipboard project and I found this great 2 pack of Chipboard albums for just $4.99 ..it was perfect. Well except I only had a few hours to actually pull it off lol.  So my apologies for the late showing… but I hope it’s worth it and you at least enjoy this crazy tangent head post.

Because I am not just going to show you  the project…

I’m going to share with you some of the origins of what inspired me to make it.  If you are British, some of it may be familiar… if you aren’t .. maybe you will learn something new.

Ok.. so here it is , this is the front cover of my ‘Album’  and I chose the smaller of the two Chipboard kits which measures approx 7×6.5.  My image this month is called Girlz – wiggle the bait

I covered it with a foiled ‘fish scale’ sheet from a DCWV I won called Coastal It has some fab papers in it..in fact I used  one of them in that other project too.

I  used Elizabeth Designs double side adhesive to attach it to the chipboard… just for speed since I have a 6 inch wide roll of it sitting here staring at me lol.I cut the paper slight over sized and used a punch to make matching holes to the chipboard.  popped it on .. smoothed it out and  tucked in the edges.. then I lined it with a matching sheet of Recollections 65lb card.

Image was cut on the Cricut and colored with Chameleon Pens… I used Zig Photo Tape to adhere all of the fishing themed  die cuts  from the Gina Marie Dies “Gone Fishing” set and the net is from the Gina Marie Lacey Lattice die set

What it  actually will be when I get the contents pages done….is a Recipe book…. for Fish. I have a friend who’s husband fishes… when he isn’t falling off  2 foot high walls and breaking bones that is… yes seriously he broke his pelvis fishing a few  years ago by falling off a two foot wall.  We jokingly refer to him as the $6 man, he has been rebuilt ..almost from scratch these past few years.

…and my friend…. well she loves to cook..and pin recipes and post them all over my Facebook feed at 3 am and gives me the munchies.. so I am dedicating this project to those two.  I left the top space blank as it will be personalized ..so for privacy reasons… I will add that later  🙂

The lyrics on the front of the book read:

Dance ti’ thy daddy, sing ti’ thy mammy,
Dance ti’ thy daddy, ti’ thy mammy sing;
Thou shall hev a fishy on a little dishy,
Thou shall hev a fishy when the boat comes in.

These were the lyrics for a show back in the 70’s  when I was growing up in the Northern part of the UK. It was called When the Boat comes in and starred James Bolam, a very well reknowned British actor who has starred in a bunch of great Tv series.  It was a period drama series set in post-World War I northeast England…and I grew up watching this.  I lived on the North East coast till I was about 8 years old, so  I have fond memories of the coast and all the small fishing villages… and the smell of Kippers smoking.

How I miss those Geordie tones!

anywho… this was the inspiration for my theme.

The inside pages where the recipes and such like will be is made of  the same 65lb card stock as the inside liner, in various hues of blue.   I’ll be adding in little fun facts, quotes and images and such to the pages as well as room to write, or stick recipes.  It’s kind of like a journal… but for recipes…with some fun facts and images thrown in.

So there you have it.. a Fun Fish filled Recipe book  with a touch of British Nostalgia thrown in.

 

I will be compensated for purchases made through affiliate links on this page

 

“Catch of the Day” fun fishing themed card

I picked up another fun new cut file in my latest traipse over at CUP,  Tri-Fold Scalloped Top Card by one of my favorite SVG designers, Rae Carr.
cup_fishies

I recently picked up some new Gina Marie Dies “Gone Fishing” and  I had  grabbed this fun image from Bugaboo Stamps called Girlz – wiggle the bait to go with them.  Well as it happens, I have been waiting for  just the right project to use the paper stack I won from DCWV a few months back.. and this was it!  It’s a gorgeous paper stack called Coastal, filled with all sorts of cool  card sheets.. including some pearl foiled and printed linen pages. cup_fishies2 cup_fishies3
I added in a dual stitched frame  using my Lil’Inkers dies and added the catch of the day chalkboard look using a Zig Chalk Pastel Pen.  The inside  net was created using the lattice portion of the Gina Marie Lacey Lattice die set I got a month or so back.  The fish was colored with Tim Holtz Distress ink pads, as was the chalk board frame and the nets and rod.

The base card was cut from a Craft Smith solid color card stack on my Cricut Explore and the image was printed on Canson Mixed Media, then colored with Chameleon Pens.

Adhesives for this project were Zig Photo Tape and Zig 2 way glue.

I was naughty….this was supposed to be my DT project for the new Bugaboo Stamps Challenge starting on the blog in January… but I was impatient to share it.  Soooo…. guess I’ll be doing another project this weekend lol.

Be sure to subscribe to the blog, or follow me on Facebook etc if you want to be alerted to the new challenge.  All you Bugaboo Stamp fans, get your creative juices flowing..  this one is exclusively for Bugaboo Stamps Projects and prizes are sponsored by Bugaboo Stamps every month.  Woo Hoo.. we love our Bugaboo Stamps, so the DT team are a bunch of happy little clams…. and ….we have a new DT  joining us for the Bugaboo Challenge too  🙂

Slightly off topic and I will be posting about this tomorrow  too.. I just had a quick peek  to see what new Gina Marie Dies are available and saw some fab deals on some Deep Red Rubber Stamps ..I was drooling over the vintage ones… specially at those prices.  They will be fab for my vintage/steampunk backgrounds.  AND for any of you old Cricut Explore owners who never got the Bluetooth Adapter... I also saw they have a handful of them available .. $10…… so if you always wanted one.. now’s the time to go grab one, they don’t have many in stock.

I will be compensated for purchases made through affiliate links on this page

 

Craftsuprint Steampunk meets Gina Marie Designs

If you follow the blog you will have seen the recent 12×12 Steampunk page I did featuring “Brianna Blaster” from KennyK stamps and a Tina Fitch Craftsuprint clock cut file. The cogs that were used on that project for the background stencil and cog embellishments came from this kit, also by Tina Fitch. I personalized the cut file with some Gina Marie Dies.. using the lattice panel from the Lacey Lattice set I just bought and also added in a butterfly and sentiment, also cut from Gina Marie Dies.

Be sure to check out the recent post about weeding these intricate dies and the “crafters toothbrush”  and a couple of card projects using these dies in a much softer project.   Versatility  is very important to me, I’m on a tight budget and need my supplies to work for their keep ….it’s got to be something I can use again and again and get a fresh look each time.

The cogs were given a metallic finish using Faber Castell Gellato’s and the gold layer of the butterfly was a split from some dollar store gold glitter card. I split the glitter layer from the card layer to give it a thinner, softer touch. I love the cog section of this cut file… it’s such a great pattern and so useful for so many other projects too.  This one was cut from a SVG file on the Cricut Explore, but is available in other machine formats too.

cup_steampunk_lattice

 

 

 

 

 

 

 

 

 

 

cup695774_596

 

 

This is the CUP file by Tina Fitch

Steampunk Card cup595493_596

 

 

 

 

I will be compensated for purchases made through affiliate links on this page

 

Challenges:

lauralcraft.weebly.com

corrosivechallengesbyjanet.blogspot

sandee-and-amelie.blog

 

 

 

 

 

 

 

2 Quickie cards featuring Gina Marie Designs

Well as some of you already know… I picked up some new Gina Marie Dies this weekend. So, after showing you how easy the Lacey Lattice really is to clean with the Crafter’s Toothbrush, I thought I would show you a couple of quick cards.

gmd_dies_The card on the left features dies from 4 Gina Marie Designs sets and the one on the right
features 2 of the same die sets.  Details below for anyone interested.

The card on the left also has a large flower which is cut on the Cricut from a CraftsUPrint cut file I picked up recently, with a beaded center and hand colored leaves … and a little rhinestone bling bling for the petite flower centers.  The Lacey Lattice was also given a coat of Ranger Distress Ink “Picket Fence” and some Wink of Stella  for a subtle vintage look.  the small flowers also have a lick of Wink of Stella.

The card on the left features a lacy lattice cut as a nested die set…and the one on the right was cut using the dies separately and a black layer was used for a subtle contrast and to tie it into the black butterfly and offset text.  I didn’t realize I had glued the text on a bit wonky till I took the photo.. DOH… practice makes perfect ..right  LOL.   The one on the right  has a Darice polka dot strip border, which was highlighted with some pink rhinestones.

All in all a quick and easy card to make , specially if  you like to use dies like these to combat the scrap bucket issue….and already have  a stash cut and ready to go.

I had to laugh when I showed a friend a sneaky peek and got this response…

“Is this SAMANTHA??????? The one I have known for over a year now! LOL”

followed by

“They are gorgeous but they are different for you. I am lovin that softer side of you ha ha ha”

Don’t get to used to it…. lol

 

 

 

 

 

 

 

 

 

I will be compensated for purchases made through affiliate links on this page

 

challenges:

letscreatechallenges.blogspot.co.uk